Subtotal: 15,000RWF
Arduino NANO
In Stock
10,000RWF
In Stock
Arduino Nano is a small, complete, flexible and breadboard-friendly Microcontroller board, based on ATmega328p, It is programmed using Arduino IDE, which can be downloaded from Arduino Official site.
Description
The Arduino NANO is a smaller, breadboard-friendlier version of the Arduino UNO. This Arduino NANO Pinout diagram reference is a handy guide for using this board:
Quick overview of Arduino Nano Pinout
| No. | Pin Number | Pin Description |
|---|---|---|
| 1 | D0 – D13 | Digital Input / Output Pins. |
| 2 | A0 – A7 | Analog Input / Output Pins. |
| 3 | Pin # 3, 5, 6, 9, 10, 11 | Pulse Width Modulation ( PWM ) Pins. |
| 4 | Pin # 0 (RX) , Pin # 1 (TX) | Serial Communication Pins. |
| 5 | Pin # 10, 11, 12, 13 | SPI Communication Pins. |
| 6 | Pin # A4, A5 | I2C Communication Pins. |
| 7 | Pin # 13 | Built-In LED for Testing. |
Arduino Nano offers three types of communications protocols, shown in the below table:
| No. | Communication Protocols | Description |
|---|---|---|
| 1 | Serial Port | 1 (Pin#0 is RX, Pin#1 is TX). |
| 2 | I2C Port | 1 (Pin#A4 is SDA, Pin#A5 is SCL). |
| 3 | SPI Port | 1 (Pin#10 is SS, Pin#11 is MOSI, Pin#12 is MISO, Pin#13 is SCK). |
memory details present in Arduino Nano:
| No. | Memory Type | Value |
|---|---|---|
| 7 | Flash Memory | 32KB |
| 8 | SRAM Memory | 2KB |
| 7 | EEPROM | 1KB |
Main Features
- Microcontroller: ATmega328
- Operating voltage: 5 V
- Supply voltage (recommended): 7-12 V
- Supply voltage (limits): 6-20 V
- Number of digital I/O pins: 14
- Number of PWM pins: 6
- Number of analog input pins: 8
- Max DC current for each I/O pins: 40 mA
- Flash memory: 32 kB (ATmega328, 0.5 kB is used by bootloader)
- SRAM: 2 kB (ATmega328)
- EEPROM: 1kB (ATmega328)
- Clock speed: 16 MHz
- Dimensions: 18.5mm x 43.2mm
- Power Jack: No
Reviews
There are no reviews yet.