No products in the cart.
Thermistor PTC 1K
In Stock
500RWF
In Stock
A Thermistor PTC 1K is a temperature sensor that is made of a semiconductor material with a positive temperature coefficient of resistance. As the temperature increases, the resistance of the thermistor also increases. It has a resistance of 1 kilohm at 25°C and can measure temperatures in the range of -50°C to 150°C. It is commonly used in thermostats, temperature sensors for HVAC systems, and electronic devices as a protection against overheating.
Description
A thermistor PTC 1K (Positive Temperature Coefficient) is a type of temperature sensor made from a semiconductor material with a positive temperature coefficient of resistance. This means that as the temperature increases, the resistance of the thermistor also increases.
The “1K” in the name refers to the thermistor’s resistance at 25°C (77°F), which is approximately 1 kilohm. As the temperature rises above this point, the resistance of the thermistor increases at a faster rate, providing a reliable means of measuring temperature changes.
Thermistor PTC 1Ks are commonly used in a wide range of applications, such as in thermostats, temperature sensors for HVAC systems, and in electronic devices as a protection against overheating. They are highly sensitive to temperature changes and can provide accurate temperature measurements within a small temperature range.
One of the key advantages of thermistor PTC 1Ks is their relatively low cost and ease of use. They are also highly reliable and can be easily integrated into electronic circuits. However, their sensitivity to temperature changes also means that they require careful calibration to ensure accurate measurements.
specifications for a typical Thermistor PTC 1K:
- Resistance: 1 kilohm (at 25°C)
- Temperature range: -50°C to 150°C
- Temperature coefficient of resistance: Positive
- Accuracy: Typically within ±1°C or ±2°C
- Thermal time constant: Typically within 5-15 seconds
- Operating voltage: Typically up to 30 volts DC
- Maximum power rating: Typically around 250 mW
- Package type: Typically in a small epoxy or ceramic package with leads for soldering
Reviews
There are no reviews yet.