Water level Sensor Module DC 3V-5V

Water level Sensor Module DC 3V-5V

In Stock
3,000RWF
In Stock
Add to Wishlist
Add to Wishlist
Order on WhatsApp
Category:

The Water level Sensor Module DC 3V-5V is an electronic device that detects the level of water in a container or tank. It operates on a DC voltage of 3V-5V and provides a digital output signal. It is highly accurate and can detect even small changes in the water level. The module is easy to install and can be powered by a battery or an external power supply. It is suitable for a wide range of applications, including water tanks, aquariums, and smart home automation systems.

Description

A water level sensor module is an electronic device that detects the level of water in a container or tank. The module operates on a DC voltage of 3V-5V and is designed to be easy to use with microcontrollers such as Arduino and Raspberry Pi.

The module consists of a probe that is inserted into the container or tank and connected to the module’s main board. The main board contains a microcontroller, a transistor, and a set of resistors. The microcontroller reads the signal from the probe and sends a signal to the transistor to switch on or off the LED on the board, indicating the water level.

The water level sensor module can be used in a wide range of applications, including water tanks, aquariums, and even in smart home automation systems. The module is easy to install and can be powered by a battery or an external power supply. It is also highly accurate and can detect even small changes in the water level.

Here are the specifications of a typical Water level Sensor Module DC 3V-5V:

  1. Operating voltage: DC 3V-5V
  2. Current consumption: <20mA
  3. Operating temperature: -10°C to 85°C
  4. Detection depth: up to 5cm
  5. Output mode: digital signal (High or Low)
  6. Response time: <500ms
  7. Accuracy: +/- 0.5cm
  8. Dimensions: 60mm x 20mm x 8mm (L x W x H)
  9. Probe length: 50mm
  10. Probe diameter: 4mm
  11. Material: ABS plastic and stainless steel
  12. Interface: 3-pin VCC, GND, and signal output
  13. Compatible with microcontrollers such as Arduino and Raspberry Pi

Reviews

There are no reviews yet.

Be the first to review “Water level Sensor Module DC 3V-5V”

Your email address will not be published. Required fields are marked *

Related products

Metal Oxide 1W 1 Ohm Film Resistor
Compare

Metal Oxide 1W 1 Ohm Film Resistor

100RWF Add to cart
A 1W 1 Ohm Metal Oxide Film Resistor is a passive electrical component that provides a fixed resistance of 1 Ohm in an electrical circuit. It is designed to handle a maximum power dissipation of 1 Watt. The resistor is made up of a metal oxide film deposited on an insulating substrate and is characterized by its stability, low noise, and high precision.
Add to Wishlist
Add to Wishlist
Analog to Digital Converter – MCP3002
Compare

Analog to Digital Converter – MCP3002

8,500RWF Add to cart
The MCP3002 is a 10-bit analog-to-digital converter (ADC) integrated circuit that provides fast and accurate conversion of analog signals to digital form. It has two analog input channels, a single power supply voltage range of 2.7V to 5.5V, and a hardware-based sample-and-hold circuit for accurate signal capture. It operates using a successive approximation register (SAR) architecture, which provides fast conversion times and low power consumption, and features a built-in reference voltage generator. The MCP3002 communicates with a microcontroller or other digital device through a serial interface, such as SPI or I2C, and is available in a compact 8-pin PDIP or SOIC package.
Add to Wishlist
Add to Wishlist
Electrolytic capacitor 22uF/400V
Compare

Electrolytic capacitor 22uF/400V

1,000RWF Add to cart
The 22uF/400V electrolytic capacitor is a type of polarized capacitor used for energy storage and filtering in high voltage and high current circuits. It has a capacitance value of 22 microfarads and a voltage rating of 400V, which indicates the maximum voltage it can withstand before failure. It is commonly used in power supply and audio circuits and is characterized by a long lifespan, low ESR, and high capacitance. However, it must be connected with the correct polarity to function properly.
Add to Wishlist
Add to Wishlist
Resistor 15 Ohm 1/4 watt
Compare

Resistor 15 Ohm 1/4 watt

100RWF Add to cart
A 15Ω, 1/4W resistor is a passive electronic component used to control the flow of electric current in a circuit. It has a resistance value of 15Ω and a power rating of 1/4W, which indicates the maximum amount of power it can handle without being damaged due to overheating. It has a tolerance of ±5% and a temperature coefficient of ±100ppm/°C. The resistor is available in different construction types, such as carbon film or metal film, and different termination types, such as axial leads or surface mount. It is commonly used in a wide range of electronic applications, including voltage divider circuits, current-limiting circuits, and filtering circuits, among others.
Add to Wishlist
Add to Wishlist
Shopping Cart
No products in the cart.
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare